Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Introduction
You just bought the Manhattan S4‑R recorder. Now you need to set it up. This manhattan s4 r setup guide walks you through six simple steps. You will learn how to connect the dish, HDMI, aerial loop, and network. For product specs, see our Manhattan S4‑R pillar guide. (1st occurrence)
manhattan s4 r setup: What is in the box?
Before starting your manhattan s4 r setup, check the contents. The box should include:
- Manhattan S4‑R recorder
- Remote control (with batteries)
- HDMI cable
- Power adapter
- Quick start guide
However, a satellite cable is not included. Therefore, use your existing dish cable. (2nd occurrence)
Step 1: Position the box near your TV
First, place the S4‑R near your TV and satellite wall socket. Good airflow is essential. So do not stack other devices on top. Also, leave space for the remote sensor.
Step 2: Connect the satellite dish cable
For a successful manhattan s4 r setup, the dish connection is critical. Screw the satellite cable into the “LNB IN” port. Hand‑tighten only – do not use tools. If you have a second cable from a quad LNB, connect it to “LNB IN 2”. As a result, you can record four channels at once. (3rd occurrence)
Step 3: Plug in the HDMI cable
Now connect the HDMI cable. Plug one end into the S4‑R’s HDMI port. Plug the other end into any free HDMI port on your TV. Then note the port number (for example, HDMI 1). Consequently, you will know which input to select later.
Step 4: Connect the aerial loop (optional)
You may also have a terrestrial aerial. If so, connect it to the “ANT IN” port. Then connect “ANT OUT” to your TV’s aerial socket. This step is optional. However, it lets you watch Freeview channels through the S4‑R without switching inputs.
Step 5: Connect to the internet
For streaming apps like iPlayer and ITVX, your manhattan s4 r setup needs a network connection. Use an Ethernet cable for the most reliable link. Alternatively, set up Wi‑Fi in the settings menu. A broadband speed of at least 10Mbps is recommended for HD streaming. (4th occurrence)
External resource: For network troubleshooting, see Manhattan support. For internet speed tests, visit Speedtest by Ookla.
Step 6: Run first‑time installation
Finally, turn on your TV. Select the correct HDMI input. Plug in the S4‑R. The setup wizard will appear. Follow the on‑screen prompts:
- Choose your region (for correct channel order)
- Scan for Freesat channels (takes 5–10 minutes)
- Connect to Wi‑Fi (if not using Ethernet)
- Sign into streaming apps (optional)
After the scan, the Freesat channel guide appears. Your manhattan s4 r setup is now complete. (5th occurrence)
Troubleshooting common issues
| Problem | Solution |
|---|---|
| No signal | Check the dish cable connection. Ensure your dish points to Astra 2. |
| No channels after scan | Run the scan again. If still none, check your LNB type. |
| Wi‑Fi not connecting | Use Ethernet temporarily. Then update the box firmware. |
| Remote not working | Replace the batteries. Point the remote directly at the box. |
For a detailed storage guide, read our manhattan s4 r storage post.
Frequently Asked Questions (FAQ)
Q1: Do I need a professional installer for manhattan s4 r setup?
A: No. If you already have a working Freesat or Sky dish, you can connect the S4‑R yourself. However, if you have no dish, hire a professional. (6th occurrence)
Q2: Can I use the S4‑R with a Sky dish?
A: Yes. Sky dishes use the same Astra 2 satellites. Therefore, the S4‑R works with any standard UK dish.
Q3: How do I update the software?
A: The S4‑R updates automatically over the internet. Alternatively, check manually in Settings > System > Software Update.
Q4: Why can I only record two channels?
A: You need two cables from a quad LNB to record four channels. With one cable, recording is limited to two channels.
Conclusion
This manhattan s4 r setup guide gets your Freesat recorder working in under 30 minutes. Connect the dish, HDMI, and network. Then run the channel scan. For storage decisions, see our storage options guide. Return to the pillar guide for more features.
